Adhese 2 Bottle Refill & Brushes - 1 x 5g

Adhese 2 from Ivoclar is a universal adhesive with both light and dual-cure capabilities, suitable for direct and indirect restorations and all etching techniques.

Adhese 2 in bottles

Applicators for the bottle, other commercial applicators or special Adhese 2 DC applicators are available.

The special Adhese 2 DC blue applicator is coated with the co-initiator required for the self-curing reaction.

When using a DC (dual-curing) procedure, make sure that you are using the correct applicator (Adhese 2 DC applicator).

When the DC applicator is dipped into the Adhese 2 liquid, the co-initiator mixes with the adhesive.

When using a LC (light-curing) procedure, an applicator without co-initiator can be used.

Adhese 2 DC blue applicators are available in two different versions:

• Regular: for cavities, crown preparations, etc.
• Small/Endo: for root canals and micro-preparations

Adhese 2 is more universal than ever!

Adhese 2 from Ivoclar offers high bond strength for greater confidence during applications, as it achieves reliable bond strength values (> 25 MPa) on enamel and dentin, irrespective of the etching protocol used.

Universal Bonding Redefined

• Fast, controlled intraoral application.
• No separate dual-cure activator is required when using self- and dual-cure composites.
• Universal application: for the adhesive cementation of direct and indirect restorations.
• Compatible with all etching techniques.

Proven Quality

• Reliably high bond strength values (>25 MPa) on enamel and dentin.
• Consistently strong adhesion on both dry and wet dentin.
• Integrated desensitising effect, minimising the risk of postoperative sensitivities.
• Predictably high bond strength values – comparable to established gold-standard systems.
• Same bonding performance as the clinically proven Adhese Universal.

Convincing Aesthetics

• Very low film thickness (approx. 10 μm) after light-curing for a precise fit of indirect restorations.
• Self-cure mode with the blue DC cannula increases the accuracy of fit of indirect restorations, as potential pooling effects do not compromise the result.

Efficient Workflows 

• Efficient dispensing, reducing cost and material waste: up to four times more applications per ml compared with conventional bottles.
• Fast, reliable light-curing in 5 seconds (using a light intensity of 2000 mW/cm2) – and only 3 seconds for restorations of Class I and II cavities in permanent posterior teeth with occlusal light-curing using the Bluephase PowerCure.

Field Of Application - Direct Restorations  

• Direct-placed light-curing composite restorations.
• Direct-placed core build-ups with light- and dual-curing composites (no activator required with dual-cure composites).
• Repair of fractured composite restorations.
• Desensitisation of hypersensitive cervical areas.

Field Of Application - Indirect Restorations  

• Adhesive cementation of indirect restorations with light- and dual-curing luting composites (no activator required for dual-cure cements).
• Adhesive cementation of root canal posts with dual-curing luting composites.
• Suitable as primer for restorations made from Tetric CAD composite blocks.

Adhese 2 Features

• Compatible with all etching protocols.
• Suited for light-cure and dual-cure applications, offering more flexibility and reliability, even in cases with limited light access.
• Consistent high bond strength (> 25 MPa) on dentin and enamel.
• Integrated desensitising effect for minimising the risk of postoperative sensitivities. 
• Free of Bis-GMA. 

Adhese 2 Indications 

• Universally suitable for direct and indirect bonding procedures.

Contents

• 1 x 5g bottle of Adhese 2 Universal Adhesive
• 25 x DC Applicator Brushes