V-Posil: Mono Fast - 380ml Cartridge

V-Posil: Mono Fast - 380ml Cartridge

Maximum precision combined with practical working and setting times

Precision impressions are a means of communication between the dentist and dental technician. Any imprecisions in an impression will transfer to the models, and can often go unnoticed until the final prosthesis is being fitted.

Modern impression materials have to meet many demands: the working time should be comfortably sufficient, whilst the intraoral setting time must be short. The material needs to offer high toughness, high dimensional accuracy and a high resistance to permanent deformation. V-Posil, the new A-silicone-based precision impression material from VOCO, satisfies all these requirements.

With a working time of up to two minutes, the flavourless V-Posil guarantees flexible working even for extensive restorations. The setting process is complete after two minutes, which means that the intraoral time for patients is pleasantly brief.

With four different viscosities, V-Posil is a compact system which caters for various impression-taking techniques: V-Posil Putty for two-step correction impressions, the sandwich technique, impressions for functional margin shaping, and correction impression technique with spacer foil, V-Posil Heavy Soft Fast for the double-mix technique, the correction impression technique and functional impressions, V-Posil Light Fast and V-Posil X-Light Fast as low-viscosity materials for correction impressions, sandwich impressions, correction impressions with spacer foil, double-mix impressions, reline/rebase impressions and impressions for removable dental prostheses. V-Posil comes in the following mixing systems: 50 ml Automix cartridges (standard 1:1), 380 ml cartridges (5:1) for use in standard automatic dispensing and mixing units, as well as in putty jars (1:1) for manual mixing.

In addition to the dentist- and patient-friendly timings and the ideal combination of viscosities, a further guarantee for optimal results is the hydrophilicity of V-Posil. It ensures outstanding flowability in the sulcus, while the thixotropic properties ensure that the material does not drip. Its toughness helps to avoid tears when removing the impression from the mouth. So V-Posil produces perfect impressions as the basis for precisely fitting restorations.

V-Posil was developed with the aim of creating a material that consistently lives up to this service philosophy, in order to combine:

• Clinically relevant parameters
• Treatment convenience
• Patient comfort

V-Posil Indications

V-Posil Mono Fast is to be used as a medium bodied tray or syringeable impression material for:

• Taking impressions over fixed/removable restorations and implants (i.e., transferring impression posts and bridge components)
• Functional impressions
• Fabricating crown and bridgework or inlays
• Fabricating full or partial dentures Reline impressions
• Transferring root posts when fabricating posts and cores indirectly
• Multi tray technique
• Use in the simultaneous mixing technique as well as the putty-wash technique

V-Posil Advantages

• Highly hydrophilic A-silicone for maximum precision
• High dimensional accuracy
• Long working time combined with a short intraoral setting time
• High recovery after deformation
• Good hydrophilicity, even after setting, renders pouring and thus the prosthetic restoration perfect

Contents

• 1 x 380ml Mono Fast cartridges