Access Go-Taper Blue NiTi Endo Files: 25mm - Size B1 (6)

Details - Size B1:

• 25mm length.
• 7% variable taper.
• ISO 20.
• Sterilisable at 134°C

Selecting the correct Go-Taper Blue File

• Create straight line access to canal orifice with A0.
• Use #10 and #15 hand files for coronal 2/3. Work with hand file instruments until a smooth glide path is confirmed. Alternatively, glide path files may be used after #10 hand file.
• In the presence of NaOCl, “float” the A1 in the canal and passively “follow” the glide path. Before light resistance is encountered, “brush” and cut dentin to improve straight-line. Always brush away from the furcation.
• Continue shaping with A1 until the depth of the #15 hand file is reached.
• Use the A2, exactly as described for the A1, until the depth of the #15 hand file is reached.
• In the presence of NaOCl, scout the apical 1/3 with #10 and #15 hand files until they are loose at length.
• Establish working length, confirm and verify the presence of glide path in the apical 1/3.
• Use the A1, with a brushing action, until working length is reached.
• Use the A2, with a brushing action, until working length is reached.
• Reconfirm working length, irrigate, recapitulate and re-irrigate, especially in more curved canals.
• Use Finishing File B1, in a “non-brushing” action, with each insertion deeper than the previous insertion until working length is reached. Do not leave the file at working length for longer than one second.
• Gauge the foramen with a #20 hand file. If the instrument is snug at length, the canal is shaped and ready to be obturated.
• If the #20 hand file is loose at length, proceed to the B2 and, when necessary the B3, B4 and B5, with the same nonbrushing motion to working length, gauging after each finishing file with #25, #30, #40 or #50 hand files respectively.

Go-Taper Blue Operatory Sequence

Go-Taper Blue Recommended Speed & Torque

Contents

• Pack of 6 x Go-Taper Blue files in size B1